|
Extreme Scratch Proof Transparent Film - THE ULTIMATE GADGET PROTECTION
Protect Your Apple iPhone 3G from Scratches without Compromising Style & Added Bulk |
|
Your search for a Apple iPhone 3G case, skin, or cover is now over. ZAGG's invisibleSHIELD™ is an exceptionally clear and virtually indestructible film that will protect your Apple iPhone 3G from unsightly scratches. ZAGG's exclusive, patented film – with nano-memory™ technology– covers and shields your device, keeping it as pristine as the day you took it out of the box.
The precision pre-cut invisibleSHIELD applies directly to your iPhone 3G, providing the toughest, most durable protection you will find. The invisibleSHIELD has its origins in the military, where it was used to protect high-speed helicopter blades from dust, dirt and debris. Now you can use that same powerful technology to protect your iPhone 3G.
The invisibleSHIELD is only .2 millimeters thick making it the slimmest iPhone 3G skin or iPhone 3G cover of its kind. It is so tough that ZAGG backs it with a lifetime guarantee. So, if it ever does wear or scratch, ZAGG will replace it for free, for the life of your device. And if you ever need to remove the invisibleSHIELD, no problem; it comes off clean and leaves no sticky residue.
Features & Benefits:
-
Specially-Designed & Sized for the Apple iPhone 3G/2nd Generation
-
Full-Body Coverage: Covers the Front "Face" and the Back of the iPhone 3G, including the LCD Touch Screen
- Scratch-Proof, patented film
- Military Grade
- Lifetime Guarantee
- Protection with No Added Bulk
- Improves Grip
- Invisible Protection
|
This Product is Compatible with the following:
Apple iPhone 3G / 2nd Generation
Additional Shipping Information:
 We can ship this product to Canada
invisibleSHIELD Application Instructions:
Turn your device off, and remove the battery if possible. ZAGG recommends letting your device sit overnight before turning it back on (12-24 hours is suggested). This will give the invisibleSHIELD time to "set up" properly, and allow any remaining SHIELDSpray solution on your device to fully dry.
-
Spray your fingertips with SHIELDSpray before handling the invisibleSHIELD to avoid putting fingerprints on it. Peel the invisibleSHIELD off its paper backing. Remember to install one (1) invisibleSHIELD piece at a time.
-
Hold the invisibleSHIELD in your hand, adhesive side up. Be careful not to let the invisibleSHIELD adhere to itself.
-
Lightly spray the front and back sides of the invisibleSHIELD with the included SHIELDSpray. (Hint: Spray the invisibleSHIELD, and NOT your device).
-
Apply the invisibleSHIELD to your device, adhesive side down, and slide into place.
-
Using the included squeegee (or any stiff plastic card), push the excess moisture and bubbles away from the center to the edges, and away from open ports. (Hints: For challenging tabs and flaps that wrap around or over the sides, ZAGG would recommend: A. holding the tabs and flaps in place against the palm of your hand until they are secure, and B. use a blow dryer on a low, cool setting to dry the pieces. Letting these parts dry for a few minutes will make them tackier and easier to install.)
-
Soak up any excess moisture with a lint-free cloth or paper towel.
|
